A Stasis Check identifies the existence of abnormally corrosive conditions
while the vessel is setting idle. Readings are taken at the bonding system,
main DC negative buss, and propulsion system (shafts, outdrives, or
outboard motors). The stasis check is performed without activating any of
the vessel's electrical equipment. Also checked is the marina's shorepower
ground wiring for the existence of stay DC current at the boat's dockside
receptacle.

This service is intended to determine any outside influences (other boats,
marina wiring, etc.) that may be having an adverse effect on your vessel. In
addition, this check is useful in determining the protection (or lack there of)
being afforded by your Zincs.

A written report is included with each Stasis Check. Documented in the
report are the voltage readings at the time of the survey. Also included, is
any relevant information on how to better protect your vessel, and any
potential hazardous conditions observed during the inspection.

        Price = $150.00 for boats in the Wilmington area.